Bespoke Gas Design & Installation, Stafford

Design, Manufacture, and Install a fired three-shuttle kiln to the following specifications:

  • Fuel Type: Natural Gas
  • Atmosphere: Oxidising
  • Max Firing Temperature: 1300°C
  • Control: Two Zone
  • Pulsed Fired: on/off

A 30% fuel saving was achieved using an SRB (Self Recuperative Burner) system and the latest two-zone pulsing on /off sequencer. This type of control system improves temperature uniformity across the chamber. Burners operate at or near their maximum firing rate when called for, resulting in the highest possible heat transfer, which continually moves the combustion products through the entire chamber and, therefore, the best quality product possible.

This type of firing system reduces fuel consumption because the burners only operate at their most efficient high fire rating. Pulsed firing reduces pollutant emissions and, therefore, has less environmental impact.

Enquire Here
eBook Cover

    Brochure Download

    Please enter your name and email to access our company eBrochure.

    Please view our Privacy Policy for more information on how we use your data

    Menu

    Approved Parts List

      Combustion Equipment natural gas /LPG

    • Individual nozzle mixing burners.
    • Gas Regulators.
    • Gas Solenoid valves.
    • Gas/Air control valves.
    • Gas flow meters.
    • Gas/Air pressure, proving switches.
    • Gas flow meters.
    • Gas regulation stainless steel braided hoses.
    • Gas tightness/proving units.
    • Flame monitoring equipment.
    • Isolation valves.
    • UV sensors.
    • Electrical Equipment

    • Kiln Elements.
    • Thyristors.
    • Contactors.
    • Door safety interlocks.
    • Damper actuators.
    • Controls/Instrumentation

    • Single/multi zone controllers.
    • Over temperature controllers.
    • Paperless recorders.
    • PLC/HMI/SCADA Systems.
    • Thermocouples

    • Single/Duplex.
    • All types e.g. R,S,K manufactured to order.
    • Refractories

    • Insulation bricks.(all grades/sizes).
    • Element support piers/trays.
    • Air setting cement.
    • Fibre modules/veneers.
    • Kiln furniture.
    • Brick cutting service.

    If we don’t carry the spare parts that you require in stock, then we can source them quickly minimising downtime of your equipment.

    Service Contracts

    • You are less likely to incur unforeseen break-downs which stop production.
    • We can carry out the service when your kilns are “shut down” so as not to waste valuable production time.
    • The regularity of the service could be six monthly or annually depending on your individual requirements.
    • After each service a full report is provided highlighting any potential issues which are brought to your attention and any suggestions for remedial works which we deem necessary.
    • A Gas Safety Certificate will be issued where appropriate.

      Contact me regarding... Bespoke Gas Design & Installation, Stafford

      Fields marked with an * are required.

      For more details on how we handle your data, please view our Privacy Policy.

        Contact Us Today

        Fields marked with an * are required.

        For more details on how we handle your data, please view our Privacy Policy.